Field Service Engineer
Principal Service Solutions is hiring Experienced Field Service Engineers to Decommission tools in Semiconductor FAB. This position is open to local candidates and travelers.
Location: Hillsboro, OR
Pay Rate: $35.00-50.00 DOE
Travelers Welcome
The principal duties and responsibilities will be:
- Chamber Wet Cleans
- Removal of chamber kits & fore lines
- Must be able to safely perform all necessary purging of both gas and liquid lines.
- Pump purging of gas lines.
- Flush drain and blowout residual liquids
- Disconnect and cap all gas and liquid lines.
- Must be able to perform complete tool shutdown.
- Power off all the system and related subcomponents
- Follow all LOTO and customer procedures.
- Daily pre-task planning with customer
- Document all decon activities (2D - Decon checklist)
- Reporting status of the Decon project.
- Must follow all customer safety protocols including LOTO and PPE
Requirements:
Must know Decon/Install/Deinstall on 300mm OEM equipment.
Minimum of 5 + years / OEM direct experience on one or more of the following:
- Wet Etch
- Metals
- Dry Etch
- CMP
- EPI Tools (300mm)
Physical Effort/Activities:
May be required to walk up to 5+miles per day, able be on feet for 8-10 hrs. at a time, ability to bend, twist, push/pull, crouch, kneel in confined spaces, work at heights, on a ladder, and lift to 50 pounds. The physical demands described above are representative of those that must be met by an employee to perform the essential functions of this job successfully.